Assembly And Installation - Yamaha WR426F Manual De Servcio Del Propietario

Ocultar thumbs Ver también para WR426F:
Tabla de contenido

Publicidad

VALVES AND VALVE SPRINGS
a
b
Combination of cylinder head and valve
lifter
1. Combination:
For this combination, match the paint
color on the cylinder head with that on
the valve lifter according to the chart
below.
Cylinder head mark
a (color)
Blue
Yellow
Purple
NOTE:
When you purchase a cylinder head, you can-
not designate its size. Choose the valve lifter
that matches the above chart.

ASSEMBLY AND INSTALLATION

1. Apply:
Molybdenum disulfide oil
Onto the valve stem and valve stem
seal.
2. Install:
Valves 1
Valve spring seats 2
Valve stem seals 3
Valve springs 4
Valve spring retainers 5
NOTE:
Make sure that each valve is installed in its
original place, also referring to the painted
color as follows.
Intake (middle) a: light blue
Intake (right/left) b: white
Exhaust: not paint
Install the valve springs with the larger pitch
c facing upward.
d Smaller pitch
4 - 39
ENG
Combination
Valve lifter mark
b (color)
Blue
Yellow
Black
New

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr426fnWr400fWr400fn

Tabla de contenido