Yamaha WR426F Manual De Servcio Del Propietario página 634

2
1
B
HANDLEBAR
NOTE:
The "ENGINE STOP" button, clutch lever
holder, decompression lever holder and
clamp should be installed according to the
dimensions shown.
Pass the "ENGINE STOP" button lead in the
middle of the clutch holder.
9. Install:
Clutch cable 1
Decompression cable 2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and decompression cable
end.
10. Adjust:
Clutch lever free play
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
Decompression lever free play
Refer to "DECOMPRESSION LEVER
ADJUSTMENT" section in the CHAP-
TER 3.
11. Insert the end of the fuel breather hose
1 into the hole of the steering shaft.
5 - 45
CHAS