Tabla de contenido
Publicidad
Part number
YU-33975, 90890-01403
YM-1423, 90890-01423
YM-01442, 90890-01442
YU-3112-C, 90890-03112
YU-08036-B
90890-03113
YM-33277-A, 90890-03141 Timing light
YM-04019, 90890-04019
YM-91042, 90890-04086
YM-4116, 90890-04116
YM-4097, 90890-04097
Tool name/How to use
Ring nut wrench
This tool is used when tighten the steering ring nut to
specification.
Damper rod holder
Use this tool to remove and install the damper rod.
Fork seal driver
This tool is used when install the fork oil seal.
Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
Inductive tachometer
Engine tachometer
This tool is needed for observing engine rpm.
This tool is necessary for checking ignition timing.
Valve spring compressor
This tool is needed to remove and install the valve
assemblies.
Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
Valve guide remover
Intake (4.5 mm)
Exhaust (5.0 mm)
This tool is needed to remove and install the valve
guide.
SPECIAL TOOLS
YU-33975
YM-1423
YM-01442
YU-3112-C
YU-08036-B
YM-33277-A
YM-04019
YM-91042
YM-4116
YM-4097
1 - 8
GEN
INFO
Illustration
90890-01403
90890-01423
90890-01442
90890-03112
90890-03113
90890-03141
90890-04019
90890-04086
90890-04116
90890-04097
Publicidad
Tabla de contenido
