Yamaha WR426F Manual De Servcio Del Propietario página 560

Ocultar thumbs Ver también para WR426F:
Tabla de contenido

Publicidad

FRONT WHEEL AND REAR WHEEL
5 - 8
EC5251A0
Rear wheel
1. Install:
Bearing (right) 1
Circlip 2
New
Spacer 3
Bearing (left) 4
Oil seal 5
New
NOTE:
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
Install the bearing with seal facing outward.
Use a socket that matches the outside diam-
eter of the race of the bearing.
Right side of bearing shall be installed first.
Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
Brake disc 1
Bolt (brake disc) 2
14 Nm (1.4 m · kg, 10 ft · lb)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
Driven sprocket 1
Bolt (driven sprocket) 2
Plain washer (driven sprocket) 3
Nut (driven sprocket) 4
42 Nm (4.2 m · kg, 30 ft · lb)
NOTE:
Tighten the nuts in stage, using a crisscross
pattern.
CHAS

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr426fnWr400fWr400fn

Tabla de contenido