Publicidad
Idiomas disponibles
Idiomas disponibles
4.
OPERATION METHOD OF THE TILLER
Before each tiller leaves the factory, it has gone through shakedown test, but the user still should check all
mechanisms of the machine and adjust them before actually using it, so as to let it work better.
4.1.
ROUTINE CHECK
1. Check engine oil
Warning!
The engine shall be filled with 0.6L of engine oil. If the level of engine oil is
lower than the normal one when the user is using the engine, the engine will be
severely damaged!
Warning!
Please use clean and high-quality engine oil for four-stroke engines. Use of dirty
oil or any other type of engine oil will shorten the engine's service life.
• Put the engine in a horizontal position.
• Screw out the oil dipstick of the engine and clean it by wiping it (See Fig. 2).
• Insert the oil dipstick into the oil filler (don't engage their threaded parts)
• Take out the oil dipstick to check oil level, if it's within the marked range of the oil dipstick, it is OK.
• SAE15W-40 engine oil is a recommended general-purpose lubricant, and is suitable for a common
ambient temperature (See Table 1)
Figure 2
EN
Oil number
Recommended
Extreme usable
numbers
Table 1
Temperature
numbers
5
Publicidad
