Stiga RC 585 Manual De Instrucciones página 143

Note: Spark arrester must be maintained every 100 hours to ensure it can work effectively.
• Loosen out two 4mm screws from the exhaust deflection pipe and take apart the exhaust deflection
pipe.
• Loosen out four 5mm screws from the muffler guard to detach the muffler guard.
• Loosen out the 4mm screws from the spark arrester to detach it from the muffler.
• Use a brush to remove carbon deposition from the mesh enclosure of the spark arrester.
Note: No cracks or damage in the spark arrester is allowed. If there is any crack or damage,
replace the spark arrester.
6.4. IDLING ADJUSTMENT OF THE CARBURETOR
• Start the engine to warm it up to the normal temperature.
• When engine is idle running, adjust the throttle valve's
limit screw to set the normal idling speed.
Normal idling speed: 1800±150rmp
EN
Throttle valve limit screw
15