Publicidad
Idiomas disponibles
Idiomas disponibles
5.
STARTING
5.1.
STEPS TO START IT
Warning!
Before starting the engine, gear shift lever must be put in the neutral position.
Clutch lever shall be released.
1. Put the choke lever to the
CLOSE position.
2. Turn the accelerator valve
regulator lever slightly to the
direction for high speed
3. Put the engine switch to ON
(open) position.
Slightly pull the starter cable until you feel a resistance, and then pull it out fast with a big force.
Never abruptly release the lever, which would let it bounce back to hit and damage the engine,
so if you want to release, slowly let it back in the direction of the starter cable's resilience.
Starting cable grip
10
CLOSE
To minimum
To maximum
Choke Lever
CLOSE
EN
Publicidad
