Avaya Octel 200 Manual Del Administrador página 340

18-36 Volumen Configuración
Modificar una apariencia de la línea en una tarjeta PIC o agregar un puerto a la tarjeta
en la tabla SLOTS
.M SLOT
Enter SLOT NUMBER to MODIFY.
Enter empty line when done.
MOD:4
Enter LSPTAB table to be referenced for this slot.
0-DEFAULT
1-ILC12_FR.
2-ILC12_GE
3-DLC16_US
4-DLC16_AU
5-DLC16_GE
6-ILC12_US
7-DLC16_FR
8-TI
9-MD110-E1
10-DLC16_UK
11-ILC12_UK
12-DLC16_90
(Empty line = 0)
MOD:
Should this card be:
Enter PORT NUMBER to ADD or MODIFY.
Add port (9 ) or
Enter empty line when done.
PORT:
Configure Integration (1-12=Msg Waiting Link):
Enter SLOT NUMBER TO MODIFY
Enter empty line when done.
.
Al modificar una tarjeta PIC, se pueden agregar puertos nuevos, así como modificar otros
existentes.
Modificar una apariencia de la línea en una tarjeta de integración MIC en la
tabla SLOTS
.M SLOT
Enter SLOT NUMBER to MODIFY.
Enter empty line when done.
MOD:4
Add port (2 ) or
Enter empty line when done.
PORT:2
Enter information for each PORT.
Enter as EXTENSION NUMBER
CLASS-OF-SERVICE (0-254), ANSWER MODE (AX, CX, MX) USE PORT FOR MESSAGE
WAITING AND NETWORK OUTCALLING (Y/N), TEST CHANNEL (Y/N)
Octel 200/300 S 4.1
(1 - PRIMARY
2 - SECONDARY
3 - TERTIARY
N - no ) sync receiver of the master clock?
(1-3, N. Empty line = N):
Modify port (1-8)
Enter PORT NUMBER to ADD or MODIFY.
Modify port (1)
connected to each port (1-8 digits),
PB60018-11 Rev B