Avaya Octel 200 Manual Del Administrador página 364

19-14 Volumen Configuración
16
Octel 200/300 S 4.1
CÓDIGO DE RECONEXIÓN TRAS TONO DE OCUPADO RÁPIDO
How do you RE-CONNECT to the caller if the CALLED EXTENSION returns
fast busy? (May include: 0-9,*,#, D=DELAY, E=EXPECT DIAL TONE, or
F=FLASH, 1-8 chars, empty line = NONE
CÓDIGO DE FIN DE TRANSFERENCIA
What digits, if any, are dialed before HANG-UP to COMPLETE a
transfer? (May include: 0-9,*,#, D=DELAY, E=EXPECT DIAL TONE, or
F=FLASH, 1-8 chars, empty line = NONE
CÓDIGO ALTERNATIVO DE COMIENZO DE TRANSFERENCIA
What is the ALTERNATE TRANSFER INITIATE CODE used to TRANSFER a
caller to another EXTENSION?(May include: 0-9,*,#, D=DELAY,
E=EXPECT DIAL TONE, or F=FLASH, 1-8 chars, empty line =
Si el parámetro no se ha modificado, el valor de empty line es NONE. En caso
contrario, este campo muestra el valor establecido anteriormente.
CÓDIGO ALTERNATIVO DE RECONEXIÓN TRAS TONO
DE NO CONTESTA
How do you RE-CONNECT to the caller if the EXTENSION called using
the ALTERNATE TRANSFER INITIATE CODE doesn't answer?
(May include: 0-9,*,#, D=DELAY, E=EXPECT DIAL TONE, or F=FLASH,
1-8 chars, empty line = NONE
CÓDIGO ALTERNATIVO DE RECONEXIÓN TRAS TONO DE OCUPADO
How do you RE-CONNECT to the caller if the EXTENSION called using
the ALTERNATE TRANSFER INITIATE CODE is busy?
(May include: 0-9,*,#, D=DELAY, E=EXPECT DIAL TONE, or F=FLASH,
1-8 chars, empty line = NONE
CÓDIGO ALTERNATIVO DE RECONEXIÓN TRAS TONO DE OCUPADO
RÁPIDO
How do you RE-CONNECT to the caller if the EXTENSION called using
the ALTERNATE TRANSFER INITIATE CODE returns fast busy?
include: 0-9,*,#, D=DELAY, E=EXPECT DIAL TONE, or F=FLASH, 1-8
chars, empty line = NONE
)
)
)
)
)
NONE )
(May
PB60018-11 Rev B