Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 111

All Monitor Settings 2
The second page of your Ursa Mini's 'all' monitor tab contains the following options:
Grids
To set which combination of grids and crosshairs you want to display on your URSA Mini's LCD
touchscreen, front and main SDI outputs, tap the 'thirds,' 'crosshairs,' or 'center dot' options in
this setting.
For more information, see the 'grids' guide in the 'touchscreen features' section earlier in
this manual.
Safe Area Guide %
To adjust the size of the safe area overlay on your URSA Mini's LCD touchscreen, front SDI and
main SDI outputs, tap the arrows to the left and right of the percentage displayed in this setting.
This percentage indicates the size of the safe area in relation to the image frame.
Most broadcasters require a 90% safe area.
Anamorphic Desqueeze
When shooting with anamorphic lenses, the image will appear horizontally 'squeezed' on your
URSA Mini's preview outputs and in recorded files. Enabling 'anamorphic desqueeze' will
correct the preview image on your URSA Mini as well as recording the desqueeze amount used
in the clip metadata for easy correction in post.
The desqueeze amount available will vary depending on what you've set your URSA Mini
resolution to, but the resulting image will always be in the cinematic widescreen 2.4:1
aspect ratio.
Anamorphic lenses designed for film typically have a 2x squeeze factor. Your URSA Mini's
'3K anamorphic' resolution is designed for use with these lenses and will perform a
2x desqueeze when set to this resolution with 'anamorphic desqueeze' enabled.
Anamorphic lenses designed for 16:9 digital image sensors often use a 1.33x squeeze factor to
produce 2.4:1 cinematic widescreen images from the entire 16:9 sensor. Therefore, when your
URSA Mini is set to 16:9 resolutions such as '4K 16:9' and 'HD 16:9,' the desqueeze ratio will
be 1.33:1.
TIP If your image appears horizontally stretched when shooting with a standard
spherical lens, make sure you don't have 'anamorphic desqueeze' enabled.
Settings 111