Descargar Imprimir esta página

Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 92

Ocultar thumbs Ver también para URSA Mini:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1166
Recording Time Remaining
At the bottom of your URSA Mini touchscreen, you'll see the storage indicators.
When a CFast card, SD card or SSD is inserted, the storage indicator will show how much
recording time is left on the card. The time is shown in minutes and will vary according to your
selected frame rate and codec.
The indicator will automatically recalculate if either of these settings are changed. When there is
approximately 5 minutes remaining on your card or drive, the indicator text will turn red, and will
blink intermittently when there is only 2 minutes remaining. The indicator displays FULL when a
card or drive reaches maximum capacity.
Your URSA Mini's storage indicator will display
the name of your CFast card, SD card or SSD
and the record time remaining in minutes
The card or drive name will also be shown in a small bar above the time remaining. This bar will
turn blue to indicate that the camera will be recording to this card or drive. On URSA Mini
Pro 4.6K G2, you can switch recording to a different card or drive using the onscreen display.
Press and hold the name of the card or USB-C flash disk you wish to record to. The bar will turn
blue. While recording, the bar will turn red. Tapping the storage indicators will bring up the
storage and formatting menu.
Tap the storage indicators on your URSA Mini's
LCD touchscreen to access the storage manager
This menu displays the amount of free space on each CFast card, SD card, SSD or external
drive currently connected to your URSA Mini, as well as the name of the card or drive, length of
the last clip, total number of clips, and the file format for each card or drive.
You can format your media from this menu. For more information on formatting media using
URSA Mini, see the 'preparing media on Blackmagic URSA Mini' section of this manual.
TIP
Tapping the card or drive name in the storage menu sets it as the active card or
drive. Your URSA Mini will fill this card or drive first.
Touchscreen Controls
92

Publicidad

loading

Este manual también es adecuado para:

Ursa mini pro