Tracker Interface; Dc Connection - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Tracker Interface

The 10 pin 'tracker' connector provides a multiplexed output for talkback and tally signals, plus
data such as teleprompter information. This output is commonly used by support crew
operating production equipment such as a camera crane.
A pinout diagram is provided in this section if you want to build your own cable.
Tracker Output Pinout Diagram
External view
2 3
1 9 4
8 10 5
7 6
10 pin 'tracker'
connector

DC Connection

You can power additional accessories, for example an external monitor, via the DC out connector.
The DC out connector lets you power
additional accessories, such as a monitor
or external recording equipment
Pins Signal
1 Tracker left
2 GND (Talk)
3 GND (Receive/PGM/tally)
4 Tracker right
5 Unregulated
6 GND (Unregulated)
7 Tracker talk (X)
8 Tracker talk (Y)
9 G Tally
10 R Tally
I/O Specifications
Tracker output,
Out
-20 dBu unbalanced
– GND for tracker talk
– GND for receive/PGM/tally
Tracker output,
Out
-20 dBu unbalanced
Out 12V DC (nom), 500mA (max)
– GND for unregulated
In
Tracker talk 0 dBu /-20 dBu,
high impedance balanced
In
On: 12V
Out
Off: high impedance (open)
On: 12V
Out
Off: high impedance (open)
D-Tap Output
Camera Unit Connections 202