Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 138

Distance
Shows the focus distance settings of the lens for the recorded clip. Some lenses can
provide this data automatically and it will be provided in millimeters. You can also enter
this data manually.
Filter
Shows the current lens filters used. Tap this setting to enter data manually. You can
make multiple entries separated by commas.
Filter information needs to be entered manually
The 'lens data' menu showing information automatically populated from a lens with
Cooke /i Technology, and filter information that has been manually entered
NOTE You can clear lens data at any time by tapping the 'reset lens data' icon
in the 'lens data' menu. You will be prompted to confirm your choice. If you
confirm, all lens data will be cleared and repopulated with any lens data
automatically provided by the currently fitted lens. If you have manually
entered any information into these fields, you will need to reset the lens data
the next time you mount a lens, otherwise the manually entered value
will remain.
Entering Metadata 138