Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 77

Use the numeric keypad on the 'custom frame
guide' screen to enter a new frame guide ratio
TIP You can change the opacity of frame guide overlays. For more information see the
'monitor settings' section of this manual.
NOTE For information on enabling frame guides on your camera's front and main
SDI outputs, see the 'monitor settings' section in this manual.
Grids
The 'grids' setting toggles the appearance of a rule of thirds grid, crosshair or center dot on the
LCD touchscreen, as well as setting the overlay that will be visible on all URSA Mini outputs.
URSA Mini Pro 12K also has an option for a horizon meter.
Tap the 'grids' icon while accessing 'LCD monitor
options' to access your URSA Mini's grid settings
On URSA Mini Pro 12K, the 'grids' setting has options for rule of
thirds grid, horizon meter, crosshair or center dot
Grids and crosshairs are overlays that can help with image composition. When 'grids' are
enabled, your URSA Mini can show a rule of thirds grid, crosshair or dot. URSA Mini Pro 12K has
an additional option so you can overlay a horizon meter.
Touchscreen Controls 77