Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 81

To toggle false color for the LCD touchscreen, tap the switch icon in the bottom left of the
screen while in the 'false color' tab.
The 'false color' exposure assistance tab
ND Filter indicator
Adjusting your URSA Mini Pro's ND filter will display the ND filter indicator in the top left of the
LCD touchscreen and any SDI outputs set to show status text. This indicator will remain on in
your 'status text' when you have an ND filter engaged. When you have it set to the position
where there is no ND filter, the 'clear' text will disappear after four seconds.
Adjusting your URSA Mini Pro's ND filter setting will reveal the ND filter indicator
NOTE You can adjust the terminology used by the ND filter indicator to reflect the
conventions you're used to. The options are ND number, stops and fractions. You can
set your preferred format in your URSA Mini Pro's 'setup' menu.
LUT indicator
The LUT icon will be visible on the LCD, front SDI or main SDI when 'status text' is switched
on and you have a LUT applied to that output.
The LUT icon lets you know that you have a LUT applied to the image
Frames Per Second
The 'FPS' indicator displays your currently selected frames per second.
URSA Mini's frames per second indicator. Tap this to access frame rate settings
Tapping the 'FPS' indicator lets you change your camera's sensor and project frame rates via
a menu at the bottom of your LCD touchscreen.
Touchscreen Controls 81