Understanding Studio Camera Control - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Understanding Studio Camera Control

Blackmagic URSA Mini can be used as a studio camera and controlled from an ATEM switcher
using the Camera Control feature in ATEM Software Control. This lets you add a camera with
large sensor picture quality and amazing dynamic range to your broadcast studio and control it
just as you would any studio camera.
ATEM Camera Control
Clicking on the camera button opens the camera control feature. Settings such as iris, gain,
focus and zoom control are easily adjusted using compatible lenses, plus you can color
balance cameras and create unique looks using the DaVinci Resolve primary color corrector.
It's important to note that the DaVinci Resolve primary color corrector and 'detail sharpening'
features of ATEM Camera Control are not available for URSA Mini Pro 12K.
The ATEM switcher control works by broadcasting camera control packets via all the non down
converted SDI outputs of an ATEM switcher. So this means you can connect an SDI output of an
ATEM switcher to URSA Mini's 12G SDI input, your camera will detect the control packets in the
SDI link and allow you to control features in the camera itself.
Connecting your URSA Mini
1 Connect your Blackmagic URSA Mini's 12G-SDI Out to any SDI In on the ATEM switcher.
2 Connect any one of the ATEM switcher's SDI outputs, except down converted or multi
view outputs, to your URSA Mini's 12G-SDI input. Camera control signals are not sent
via the multi view and down converted SDI outputs.
3 On your URSA Mini, navigate to 'ATEM Camera ID' in the 'setup' menu and set your
camera's ATEM ID to match the switcher input. For example, if URSA Mini 1 is connected
to Cam 1 on the ATEM switcher, the camera number must also be set to 1. This ensures
tally is sent to the correct camera.
4 In the 'setup' menu select your 'reference source'. Unless you have a genlock signal
being sent to all of your cameras and your switcher, we recommend setting 'reference
source' to 'program' when attached to ATEM.
Understanding Studio Camera Control 251