Festo CMMP-AS-M3 Serie Manual Del Usaurio página 63

5 EtherNet/IP con FHPP
Device Level Ring Object (Class Code: 0x47)
El objeto DLR se utiliza para configurar una red con la topología de anillo conforme a la especificación
DLR (Device Level Ring) de EtherNet/IP.
Instance
0 Class
1 Instance
Attributes
Tab. 5.11 Device Level Ring Object
Festo – GDCP-CMMP-M3-C-HP-ES – 1205NH
Atributo Nombre
1 Revision
1 Network Topology
2 Network Status
10 Active Supervisor Address
12 Capability Flags
Descripción
Revision of this object.
Current network topology mode
0 indicates "Linear"
1 indicates "Ring"
Current status of network
0 indicates "Normal"
1 indicates "Ring Fault"
2 indicates "Unexpected Loop
Detected"
3 indicates "Partial Network
Fault"
4 indicates "Rapid Fault/Res-
tore Cycle"
IP and/or MAC address of the active
ring supervisor.
Describes the DLR capabilities of
the device.
63