Installing Throttle Link - TOHATSU EverRun MX50D2 Manual De Servicio

Power Unit
1 1
LIT
LIT LIT LIT
a a
3 3
4 4
5-90
All manuals and user guides at all-guides.com

29) Installing Throttle Link

2 2
1. Assembling advancer lever.
Align spring 1 and slot of the advancer lever 2, and
turnover the stopper a to install as shown.
LIT
Attach starter motor bracket 3, and tighten the nut to
2.
specified torque.
Attach coil plate bracket 4 to cylinder ass'y and secure
3.
them with bolts.
4. As for the installation of the following part, refer to the step
of their removal.
• Advancer arm
• Throttle link rod
Apply grease to advancer lever spring and collar.
LIT
Starter Motor Bracket Bolts :
12 N · m (9 lb · ft) [1.2 kgf · m]
Coil Bracket Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
Apply grease to collar of advancer arm.
GB
2st X50D2 2011