Throttle Link Adjustment; Advancer Arm Adjustment; (In Reverse) - TOHATSU EverRu MX 18E2 Manual De Servicio

Maintenance
1 1
2 2
2 2
.5 2mm
1
3-18
3 3
OBM OBM OBM
OBM OBM
3 3
a a
1 1

10) Throttle Link Adjustment

1. Perform ignition timing adjustment before throttle link
adjustment.
2. Rotate the throttle grip fully toward the SLOW side until
the grip stops.
Adjust throttle lever end 1 so that a gap a between
3.
throttle lever's roller 2 and throttle cam 3 to be 1.5mm in
while pressing its roller toward to opposite side of cam
lightly.
Throttle Cam Gap a : 1.5 mm

11) Advancer Arm Adjustment

Using the M8 nylon nut 1, adjust so that the throttle grip
1.
can be operated lightly and the grip does not return to its
original position when you release your hand.
12) Opening Throttle Adjustment

(in reverse)

1. Shift gear into Neutral (N).
Rotate the adjusting screw 1 and adjust so that the height
2.
is 11.5–12mm.
GB
2st X18E2 2012