Removing Lower Unit - TOHATSU EverRun MX50D2 Manual De Servicio

Lower Unit
3
1
3 Spring Pin
Do not reuse.
X50
B
B B
8
4
4 MX50:M8 6pcs.
6-24
All manuals and user guides at all-guides.com

3) Removing Lower Unit

1. Shift the gear into forward (F) to set shift rod to upper
position.
2. Remove spring pin and disconnect shift rod.
2
Remove lower unit installation bolts 4, and pull lower unit
3.
ass'y downward to remove.
4 MWX50:M8 4pcs., M10 2pcs.
WARNING
When working with outboard motor in tilt
up position, be sure to lock with tilt
stopper.
· Removal of lower unit does not require removal
of power unit from outboard motor body.
· When removing lower unit from outboard motor,
tilting the outboard motor makes the work easier.
· Disconnect shift rod at upper side of shift rod
joint 1.
· Use spring pin tool A 2 to remove spring pin.
· Do not reuse removed spring pin.
· To hold lower unit, keep spring pin tool inserted
until the step of removal of lower unit.
Spring Pin Tool A 2 (ø3.0) :
P/N. 345-72227-0
CAUTION
Hold lower unit while removing it to prevent
it dropping on the floor.
Loosen all lower unit securing bolts except B (2
pcs.) in diagonal order, remove bolts B, and then,
remove all other bolts.
WX50
B
10
B B
8
4
GB
10
2st 50D2 2011