Descargar Imprimir esta página

Hettich HettCube 60 Manual De Instrucciones página 100

Publicidad

Idiomas disponibles

Idiomas disponibles

Transport and storage
4
Transport and storage
Storage conditions
Receiving
Transport
16 / 82
DANGER
A danger is posed by penetrating liquids.
There is an electric shock hazard for personnel.
If liquid has penetrated into the incubator, the
incubator must not be put into operation.
In such a case, contact a service technician of the
manufacturer.
The incubator can be stored in the original packaging.
If the incubator is stored unpacked, then please remove all
items from the chamber, disconnect the device from the mains,
clean and dry the chamber and leave the door open to prevent
unpleasant odours.
The incubator may only be stored in dry rooms.
The storage temperature must be between 0°C and +50°C.
The humidity must be of non-condensing nature and between
10% and 70%.
NOTICE
When you receive the device, visually inspect it to
assess its condition in the presence of the personnel
delivering the goods, and ensure that the scope of
supply is complete.
The courier company is responsible for any damage
caused during transport.
Before transporting the incubator, make sure that all connection
lines are removed.
DANGER
A danger is posed by penetrating liquids.
There is an electric shock hazard for personnel.
If liquid has penetrated into the incubator, the
incubator must not be put into operation.
In such a case, contact a service technician of the
manufacturer.
The device may not be transported when it is loaded.
During transport, note the weight of the incubator.
When transporting with a transport aid (e.g. transport cart), this
must be able to bear a weight at least 1.6 times the permissible
transport weight of the incubator.
Secure the incubator against tipping over and falling down during
transport.
02.2023 / Rev. --
AB69601en

Publicidad

loading

Este manual también es adecuado para:

Hettcube 120