Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
6.11
Statistics
48 / 82
Fig. 42: Quick Change of the fan speed of the ventilator and/or the
air flap position (degree of opening)
Go to the main menu
the statistics for the running or finished program. Statistics are calcu-
lated separately for each segment. Data logging for calculation starts
after 30 seconds from reaching the set temperature in the segment.
Further data are registered every minute.
The following information is available:
■
set temperature [°C] – the set temperature in the segment,
■
minimum temperature [°C] – the lowest recorded temperature,
■
maximum temperature [°C] – the highest recorded temperature,
■
average temperature [°C] – the average temperature recorded,
■
segment – status of the segment:
–
in progress – currently running segment (data are being con-
stantly updated),
–
finished – the segment has been completed,
–
interrupted – the user interrupted the segment before the set
time had elapsed,
■
segment 1/2 – the number of the currently monitored segment /
number of the currently performed or completed segment. Navi-
gating between the segments is done by swiping up or down.
You cannot overview any segment that has not
started yet.
02.2023 / Rev. --
and press the
icon. This window shows
AB69601en
Publicidad
