Publicidad
Idiomas disponibles
Idiomas disponibles
Commissioning
2
2
Fig. 8: Installation of glass door
(optional)
5.5
Changing the door swing
5.5.1
Door
22 / 82
1.
Unscrew the existing screws on the desired hinge side.
2.
Screw with two of these screws on the lower hinge (2) and with
two of these screws on the upper hinge (2) of the door.
1
Pay attention to the orientation of the glass door when
screwing it on.
3.
After attaching, check the function of the glass door (screws
tightened enough, door is attracted by the magnet when it is
closed.)
1
4
3
Fig. 9: Changing the door swing
1
Upper hinge
2
Lower hinge
3
Space for lower hinge
4
Space for upper hinge
Two people are required for the changeover.
1.
Remove the two screws (4) at the provided location of the
upper hinge.
2.
Remove the three screws from the lower hinge (2). The door
must be securely held by a second person.
3.
Remove the door.
4.
Turn the door through 180 degrees (so that the bottom is now
on top).
5.
Remove the two screws from the upper hinge (1).
6.
Remove the upper hinge (1).
7.
Fit the lower hinge with 3 screws on the other side of the
device (3). Loosely tighten the screws.
02.2023 / Rev. --
1
2
AB69601en
Publicidad
