Hettich HettCube 60 Manual De Instrucciones página 121

6.8.1 Creating / editing a program
AB69601en
Removing the selected program from the list.
Fig. 25: List of programs
Information on the number of created programs / the maximum
number of programs that can be created is at the top of the screen
(programs: 5/5).
By pressing button
appears.
The program name is assigned automatically and cannot be
changed.
In this window you can set:
■
Number of segments – max. of 6 segments
■
Interval – frequency at which data are saved in the data record (1
min, 2 min, 5 min, 10 min, 15 min, 30 min, 1 h)
■
Protection class – for more information, see ⮫
tection class' on page 42 .
■
Protection temperature – temperature range for the protection
class, for more information see .
■
Priority – the priority of time or parameters; for more information
Chapter 6.8.4 'Priority' on page 42 .
see ⮫
■
Loop – the number of program repetitions; for more information
Chapter 6.8.5 'Repetition / Loop' on page 43 .
see ⮫
02.2023 / Rev. --
or , a window with program parameters
Operation
Chapter 6.8.3 'Pro-
37 / 82