Hettich HettCube 60 Manual De Instrucciones página 98

Device description
3 Device description
3.1 Standard device
7
6
5
4
Fig. 1: Unit front side
1 Housing
2 Mains power switch
3 Device base
4 Door handle
5 Door lock
6 Touchscreen
7 USB port
4
3
Fig. 3: Rear of the unit
1 LAN connection
2 Air flap
3 Mains cable socket
4 Fuse
14 / 82
Touchscreen including
■
Temperature monitor class 3.1.
■
Tolerance range asymmetrically adjustable.
1
■
Door alarm individually adjustable.
2
The incubator is equipped with a temperature monitor of protection
class 3.1 in accordance with DIN12880:2007-05. The temperature
monitor is used to protect the incubator (device protection), its sur-
roundings and the sample material (sample protection) against imper-
missible temperature overshoots.
3
6
5
4
Fig. 2: Front of unit, door open
1 Temperature sensor
2 Inserting shelf
3 Interior made of high-quality stainless steel
4 Glass door (optional)
5 Glass door handle (optional)
6 Access port
For cable glands, use the access port on the side of the unit.
The incubator is fitted with a Ø 30-mm access port on the side of the
unit.
Cables from external measuring systems can be fed into the interior
through this opening.
After routing the cables through the opening, the
access port must be sealed on the unit's side to
prevent temperature deviations in the interior. If the
access port is not used, it must be sealed with a
plug.
All devices have a key-operated lock. Two keys are included in the
scope of supply, which can be found affixed to the rear of the device.
1
All devices have a sensor that detects whether the door is open or
closed. When the door is open, the open door icon appears on the
2
touchscreen. The number above the icon displays the counter which
indicates how often the door has been opened.
Reset the counter by tapping the icon. The counter is also reset
when the device is switched off.
02.2023 / Rev. --
1
2
3
AB69601en