Publicidad
Idiomas disponibles
Idiomas disponibles
5.5.2
Glass door
2
2
Fig. 10: Changing the door swing -
Glass door (optional)
AB69601en
8.
Fit the upper hinge (1) into the door.
9.
Hang the door on the lower hinge. The door must be securely
held by a second person.
10.
Fit the upper hinge (4) with 2 screws.
11.
Adjust the door so that the door seal makes contact. Only then
tighten the screws of the lower hinge.
Two people are required for the changeover.
1.
Remove the two screws (2) from each of the hinge positions
provided.
2.
Remove the two screws from the lower hinge (1) and the two
screws from the upper hinge (2) of the door. The door must be
1
securely held by a second person.
3.
Turn the door through 180 degrees (so that the bottom is now
on top).
4.
Screw in the two screws on the lower hinge (2) and the two
screws on the upper hinge (2) of the door.
1
5.
Screw two screws into each of the places of the previous
hinges (1).
6.
After attaching, check the function of the glass door (screws
tightened enough, door is attracted by the magnet when it is
closed.)
02.2023 / Rev. --
Commissioning
23 / 82
Publicidad
