Publicidad
Idiomas disponibles
Idiomas disponibles
Delayed start of the program from the list of programs. The program starts according to the
set date and time.
Calling up the quick program function
Turning off the alarm tone. Critical alarms (i.e. damage to the temperature sensor, tempera-
ture protection, etc.) continue emitting the alarm tone.
When the program is running, click the icon to quickly change the fan speed (Quick Change
function).
In the program editing/creating mode: the degree of air-flap opening. In the operating mode
(program started) clicking on the icon allows you to quickly change the air flap position
(degree of opening) without having to edit the program.
The active Smart Temperature Monitor (STM) function informs the user of any problems
incurred with reaching or maintaining the set temperature.
■
White text - option enabled, the program is stopped
■
Blue text - option enabled, the program is running
■
Red text - warning about problems with reaching / maintaining the temperature
6.6.6
Upper expandable and configurable menu
AB69601en
When the program is running, in the upper part of the main screen
there is a bar menu with parameter icons (temperature, time, fan
speed (only for incubators with forced convection) and air flap posi-
tion (degree of opening)), which can be quickly changed (via the
Quick Change function).
Depending on the model, you will see icons for all parameters that
can be changed quickly by swiping your finger downwards. Among
the options available in the bar you will see the following icons:
■
Unmount USB flash drive.
■
Mute option. Critical alarms (i.e. damage to the temperature
sensor, temperature protection, etc.) continue emitting an alarm
tone.
■
Quick Change of:
–
program duration time,
–
set temperature,
–
fan speed and air flap position (degree of opening).
02.2023 / Rev. --
Operation
33 / 82
Publicidad
