Publicidad
Idiomas disponibles
Idiomas disponibles
General Information
2.6 UPS IDENTIFICATION LABEL
After receiving the equipment and unpacking it, make a visual inspection inside and outside
the UPS and also in the battery module (when included) so as to check for any damages that
may have occurred during transportation.
Report any problems immediately to the carrier.
Check that the material is supplied according to the packing list. Check that the information
on the product identification label matches the purchased model
Model
MOD:
OP.:
Production order
Product technical
specifications
2.7 RECEIVING AND STORAGE
If the ups will not be installed right after the delivery, some safety measures should be taken in
order to ensure the integrity and warranty of your product:
Keep the product in its original package, protected from humidity, rain, sea air, wind action or
„
high temperatures (+ 5 to + 40 °C (41 to 104 °F), relative humidity below 95 % non-condensing).
If the battery module is also provided, make sure that no more than 120 days have passed
„
after the last recharge. Vented lead-acid batteries or valve-regulated lead-acid (VRLA) batteries
develop irreversible chemical reactions of sulphation, seriously compromising their capacity
and useful life when they are not recharged for a period longer than 120 days.
9 | Enterprise
Jaraguá do Sul - Brazil
WEG, CP420 - 89256-900
Power:
Input V:
Output V:
Cor Estrutura:
TAG Cliente:
Nº Fases:
Comunicação:
MADE IN BRAZIL
HECHO EN BRASIL
Figure 2.2: UPS identification label
(Figure 2.2 on page
7
9 0 9 32 2
97372 2
MAT.:
SERIAL#:
Frequency:
Current:
Battery V.:
Grau de Proteção:
Plano de Pintura:
Rodízios:
Partida por Bateria:
Documentação:
20R
9).
WEG material
number
Serial number
Product technical
specifications
Publicidad
