Publicidad
Idiomas disponibles
Idiomas disponibles
Control Panel
4.2 LCD CONTROL PANEL
PRESS THE MENU BUTTON
To return to the previous menu or to
enter the main menu from the alarm
display
During the UPS normal operation, the control panel displays a series of messages to indicate
the operating status of the individual subsets of the system. Thus, the operator is informed in
real time (also with the acoustic signal) of any failures occurred in the system.
4.2.1 Multilevel Menu Index
Table 4.2 on page 34
Menu
UPS STATUS AND ALARMS
MEASUREMENTS
UPS COMMANDS
PANEL CONFIGURATION
EVENT LOG
SERVICE MODE
You can navigate the 6 menus listed in
(<) buttons.
When you press the NEXT (>) and BACK (<) buttons simultaneously, the ENTER (<>) command
is selected, and, confirming the selection, you go to the next menu level.
In order to return to the previous menu, press the MENU button.
Each alarm indication on the display is accompanied by a beep that can be switched off by
pressing the ESC button.
34 | Enterprise
BACK BUTTON NEXT BUTTON
To navigate between the menu and the submenu.
Pressing both simultaneously activates the
command ENTER
Figure 4.2: Functions of the HMI buttons
contains the list of available menus.
Table 4.2: Available menus on the HMI
Nº
1
This is the default content of the LCD display. The system automatically returns
to this level when the keys are not pressed for 3 minutes
2
Used to display the values of all measurements
3
Turns on/off the UPS, static switch, battery test
4
Date/time/battery test/language settings
5
Displays the event log and related alarms
6
Reserved for technical services
Table 4.2 on page 34
PRESS THE ESC BUTTON
To turn off the acoustic alarm
Note
using the NEXT (>) or BACK
Publicidad
