Descargar Imprimir esta página

WEG UPS 10 kVA Serie Manual Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety Instructions
DANGER!
Always disconnect the general power supply before touching any electrical
device connected to the UPS.
Many components may remain charged with high voltages and/or moving parts
(fans) even after the battery circuit breaker is switched off.
Wait for at least ten minutes in order to guarantee the full discharge of the
capacitors.
ATTENTION!
Electronic boards have components sensitive to electrostatic discharges. Do
not touch the components or connectors directly. If necessary, first touch the
grounded metallic frame or wear a ground strap.
NOTE!
Read all this manual before installing or operating this UPS.
ATTENTION!
The operation of this equipment requires detailed installation and operation
instructions provided in the user's manual and manuals/guides for kits and
accessories. Only the user's manual is supplied in print. The manuals are
available for download on the website: www.weg.net.
ATTENTION!
When in operation, electric energy systems – such as transformers, converters,
motors and cables – generate electromagnetic fields (EMF). Therefore, there
is risk for people with pacemakers or implants that stay in close proximity
to those systems. Thus, such people must stay at least 2 meters away from
those devices.
ATTENTION!
During the installation of the equipment, it is mandatory to fill out the Start-up
form available for download on: www.weg.net. After filling it out, contact WEG
technical service to send the form.
Failure to fill out and submit this form may void the product warranty.
Enterprise | 3

Publicidad

loading