Publicidad
PLAY MODE
Playing a Disc
In continuous play mode, you can play from
the first selection or a desired selection on
your disc.
Before playing a disc, turn on the amplifier
and set the input selector to the CD player
position.
Continuous Play
1 Press POWER.
The display lights up.
It "CONTINUE" does not appear, press
CONTINUE on the remote commander.
When using PLAY MODE on the main
unt, press it until "CONTINUE" appears
2 Press & OPEN/CLOSE.
The disc tray comes out.
3 Place the disc with the printed side
up on the tray.
4 Press>.
The disc tray closes to start the first
selection.
The display shows:
a) Selection number
b) Index number (The custom index
number is displayed instead of the
normal index number in the C.INDEX
mode.)
c) Elapsed playing time
d) Music calendar
To stop play
To stop for a moment during play, press (1
To resume play. press & or If again.
To stop play, press @.
To stop play and open the tray, press &
OPEN/CLOSE.
To adjust the Volume
e When you use the VARIABLE LINE
QUT jacks for connections
You can adjust the volume with the LINE
OUT/PHONE LEVEL control (or LINE
OUT LEVEL +/- on the remote
commander).
¢ When listening with headphones
Connect a pair of headphones to the
PHONES jack.
You can adjust the volume with the LINE
OUT/PHONE LEVEL control (or LINE
OUT LEVEL +/—- on the remote
commander).
To play an 8cm (3-inch) CD
Place it on the inner circle of the tray. If the
disc is provided with an adaptor, first
remove it. Do not put a normal CD (12cnv
§-inch) on top of an 8 cm CD.
Publicidad
