Publicidad
(1)- Bd
>20
REPEAT
ese ees ee es |e)
Playing a Disc
To adjust the brightness of the re
display ~ DIMMER function
Press REPEAT while holding down TIME/
MEMO.
You can adjust the brightness of the display
in three levels. The level you select is kept
in memory even if you turn off the unit so
that you do not have to adjust it again.
Note
The time display mode selected with TIME/
MEMO (or TIME on the remote
commander) will not change unti! the power
is tuned off.
if you have stored a disc memo
The stored disc memo will be displayed,
following the display of the remaining time
of the disc.
Locating a Particular
Selection
You can locate the beginning of a desired
selection in two ways.
a) To locate sequentially
To locate the beginning of the current
or preceding selection
¢ Press K@<@ as many times as required.
¢ Keep kd pressed to skip selections.
To locate the beginning of a
subsequent selection
¢ Press BP as many times as required.
¢ Keep BI pressed to skip selections.
b) To locate directly ri
Press one of the numeric buttons ((1] to
[20}) to enter the desired selection
number.
if a selection number is greater than
20,
use the
and [11 ]to [10] buttons.
functions as the figure 0.
€.9. To play from selection No.22
Press
and (2) (2)
e.g. To play from selection No.30
Press[>20) and[3]
Publicidad
