Publicidad
Designating the Playing
Order of Up to 6 Discs
Playing the Program
1 insert the first disc.
2 Press b>.
When the last selection on the first disc
is over "NEXT DISC" appears in the
display.
3 Replace the first disc with the next
one and press >.
Continue replacing until the tast disc.
After the last disc has been played.
*-END-° appears in the display and the
unit returns to the initial standby
condition.
To play the selections for side B
When the selections for side A are played,
the unit enters pause mode ("B" lights up.).
Set the tape to the beginning of side B,
then press & or ft.
To stop play
Press @.
To check your program
i
Each time you press CHECK, the selection
in the program will be displayed along with
its selection number, order and disc
number.
When CHECK is pressed after the last
selection,"-END-° appears and then the
display returns to the initat display.
To check the current disc number
Press TIME/MEMO (or TIME on the remote
commander) during stop.
The disc number appears in the display.
To return to the continuous play
Press CONTINUE. The program will be
erased.
To check the remaining time in
multi-disc program play
Press TIME/MEMO (or TIME on the remote
commander) once to see the remaining
time of the selection being played: twice to
see the remaining time of the disc being
played. The remaining time of the program
cannot be displayed for multi-disc
programs.
Publicidad
