Publicidad
atc.ecelgellare prs!
Program
You can make a program by designating up
to 24 selections in a desired order. At the
same time, you can adjust the total playing
time of the program so that you can make
the program fit the length of a tape when
recording.
In addition, you can make a program for
side 8 by inserting a pause after the
program for side A.
Programming and Recording
1 Press PROGRAM.
2-A
Press the numeric buttons of the rt
desired selections in the desired
:
order.
To select a selection number over 20,
2-A
=>
ex
see page 22.
The display shows:
a) The last programmed selection
b) The order to be played
c) The total playing time
d) Programmed selection numbers
if you choose wrong selections
Each time you press CLEAR, the last
selection chosen is deleted.
2-8
To find selections which fit in the
y)
remaining time
1) Press <4 or BP to choose a
selection and check the time.
~ Program edit
If satisfactory, go to the next step If
not, choose another selection.
2) Press PROGRAM (or PLAY MODE
repeatedly on the main unit).
The selection is stored.
3 Press If to make a program for side
B.
"P" appears in the display and the
playing time is reset to 0.
A pause is also counted as a selection
3
4 Program selections for side B by
;
repeating step 2-A or 2-B.
(Continued)
Publicidad
