Publicidad
62
'B erylelarcitiare mtat=m (eo) 61
Playing Time
Playing the Program
Press >.
The selections for side A will be played and
then the player will pause. °B' lights up in
the tape side indicator. Set the tape to the
beginning of side B, then press f1 or >.
To cancel the edit, press CONTINUE and
return to continuous play mode. The
program will be erased.
To check you program (See page 36).
You cannot edit selections,
e If you have programmed a selection
number over 24.
¢ If you have programmed up to 24 steps
(i.e. selections plus pauses).
¢ If you have programmed selections whose
playing time exceeds 100 minutes.
To designate a different time for each
side, execute steps 1 to 3 and press fl, then
repeat steps 1 and 3. Do not execute
step 4.
rea Navigation Display [a
A |
Press <@<4 >
or one of the numenc
buttons ((7}~(19) to set the recording
time.
2 Press EDIT/TIME FADE to edit Side A
(or B).
3 Either add by using the numeric buttons
(G)~&) or change the disc.
This message means that all the selections
are programmed and more can be
Programmed (Link edit).
4
1'22° remains but no selection from the
disc can be accommodated.
Press the EDIT/TIME FADE to end.
This message appears after programming
selections for side 8, when more than 1
minute remains and when there is no
selection fitting in the time on the disc You
can replace the disc to program the selection
fitting in the teme from another disc. If there
are some selections fitting in the time.
selection numbers will appear in the display
5 Editing is done.
Publicidad
