Publicidad
Designating the Playing
(O] co :1me)m 6) oR (ono O)[-e-)
You can program selections on one disc
after another (Multi-disc program). You can
choose up to 24 selections from up to 6
discs for playing in any desired order.
1 Insert the first disc.
2 Press PROGRAM (or PLAY MODE on
the main unit).
3 Program desired selections on the
first disc.
Press the appropriate numeric buttons
on the remote commander or press 4
or <4
and PROGRAM on the remote
commander or PALY MODE on the
main unit.
The display shows:
a) The last programmed selection
b) The order to be played
c) The total playing time
d) Programmed selection numbers
5 Repeat steps 3 to 4 to program other
3
=
=
selections.
Up to 24 selections from up to 6 discs
can be programmed.
To program selections recorded on side
a
es
B
AMS
PROGRAM
aca
Press Il to put a pause and then program
selections to be recorded on side B.
if you press & by mistake when
aap
inserting the second disc
The multi-disc program will be overridden
by the continuous play mode. Note that the
programmed selections on the first dis¢ will
be cancelled at this time.
To program selections on the first disc
again
You can program selections on the first disc
again
When you set auto space function
The auto space cannot be set during multi-
disc programming. Be sure to set the auto
space before programming. (See page 26)
The following functions cannot be
conducted on Multi-disc programs
¢ Repeat play
¢ Program bank
Publicidad
