Publicidad
& OPEN/CLOSE
jaad
fo
moe
col
Soa
els
Playing ina
Desired Order
To check your program
Press CHECK. The first selection in
a
the program will be displayed. Each time
you press CHECK, the last selection in the
program will be displayed. After the next
selection, "-END-" will be indicated and the
display will soon return to the initial status.
Ol er-]arelbare Mm Aelelam cagele ela)
Hi
You can make the following changes before
starting play.
To erase the last selection, press CLEAR.
Each time you press CLEAR, the fast
selection in the program will be erased.
To add a selection to the end of the
program, simply press the numeric bulton
for that selection. You can add a selection
also during play or pause.
To delete a selection, press CHECK
repeatedly until the unwanted selection 1s
displayed. Then press CLEAR.
To change the order, press @ in stop
mode to erase the program. Then repeat
the programming procedure trom the
beginning.
To check the remaining time
Press TIME/MEMO (or TIME on the remote
commander) once to see the remaining
time of the selection being played; twice to
see the total remaining time; once more to
return to the initial display.
If you have inserted a pause. the display
shows the total remaining time unt the
pause.
When you use the auto space
function
All the blank spaces between selections will
automatically be set uniformly to 3 seconds,
which will be included in the dispalyed
playing time for each selection.
(See page 26.)
if you use the program bank function
You can have the unit memorize the programmed
selections for each disc. (See page 82.)
Publicidad
