Publicidad
ats eelceliale mrs!
Program
5 start recording on the cassette deck
and press >.
The selections for side A starts playing.
It is better to start recording on the
cassette deck first to transport the
leader tape before pressing ® on this
unit.
To play the selections for side B
When the selections for side A are played,
the unit enters pause mode. Reverse the
tape, then press
or Ul.
To check your program
See page 36.
While checking the program for side A, {2.0}
appears, while for side B 10.0} appears in
the display.
To change your program
See page 36.
To check the remaining time
Press TIME/MEMO (or TIME on the remote
commander) once to see the remaining
time of the selection being played: twice to
see the total remaining time; once more to
return to the initial display.
If you have inserted a pause, the display
shows the remaining time until the pause.
When you use the auto space function
All the blank spaces between selections
will automatically be set uniformly to 3
seconds.
Therefore. playing time displayed for each
selection will include an additional 3
seconds. (page 26)
if *----" is displayed instead of the
total playing time
- You have programmed a selection
number over 24.
- The total time has exceeded 100 minutes
The program is erased in the following
cases
¢ If you change the play mode.
¢ If you turn off the power during program
play.
Publicidad
