Publicidad
Designating the Playing
Order of Up to 6 Discs
Oi st-Taletiaremzeleian ®] cere |a-lin)
You can make the following changes
before starting play.
To erase the last selection
rt
Insert the last disc programmed, and press
CLEAR. Each time you press CLEAR, the
last selection of the program will be erased.
To continue erasing selections replace the
discs in the reverse order you have
programmed and repeat the procedure.
{f a pause has been programmed, the
selections, programmed before the pause,
cannot be cleared.
To add a selection to the end of the
program
Insert a disc and press the numenic buttons
for that selection. You can add a selection
during stop.
To erase the entire program
Press
once in the stop mode, twice
during play. The program wilt be erased.
If you mistake the disc order
Even if a disc is inserted in an incorrect
order, the selections chosen from that disc
will be played. However, when a disc which
has already been played is inserted.
program play will not proceed. In addition,
when a seventh disc is incorrectly inserted.
"DISC FULL" will be displayed.
Publicidad
