Convenciones Y Definiciones De Los Diagramas - Rockwell Automation PowerFlex 750 Serie Manual De Programación

Apéndice A Diagramas de bloques de control PowerFlex 753
Convenciones y definiciones
de los diagramas
354
De nitions of the Per nit system
1.0 PU Position = Distance traveled / 1sec at Base Spd
1.0 PU Speed = Base Speed of the Motor
1.0 PU Torque = Base Torque of the Motor
Symbol egend
Drive
Option Module
Parameters
Parameters
( ) = Enumerated Parameter
[ ] = Page and Coordinate
ex. 3A2 = pg 3, Column A, Row 2
= Constant value
'd' = Prefix refers to Diagnostic Item Number
ex. d33 = Diagnostic Item 33
Publicación de Rockwell Automation 750-PM001N-ES-P – Febrero 2017
Requires port number.
Read Only Parameter
Read / Write Parameter
Read Only Parameter with Bit Enumeration
Read / Write Parameter with Bit Enumeration
Provides additional information
* Notes, Important :
(1) These diagrams are for reference only and may
not accurately refiect all logical control signals;
actual functionality is implied by the approximated
diagrams. Accuracy of these diagrams is not
guaranteed.