Publicidad
POWR
ENGINE UNIT
SERVICE POINTS
Shim removal
1. Remove:
Shims
G
NOTE:
To ease reassembly and coupling align-
ment, remove the shims and organize them
in their respective groups (e.g., front right,
rear left) prior to removing the mounting
bolts.
Engine mount inspection
1. Inspect:
G
Engine mounts
Cracks/damage → Replace.
Coupling clearance inspection
1. Measure:
Clearance a
G
Clearance b
G
(with the rubber damper)
Out of specification → Adjust.
NOTE:
Measure the clearances with a straightedge
and thickness gauge.
Clearance a:
0–0.5 mm (0–0.020 in)
Clearance b:
2–4 mm (0.079–0.157 in)
2. Adjust:
Clearance a and b
G
Adjustment steps:
Adjust the clearance a by adding or
G
removing shims.
Adjust the clearance b by moving the
G
engine unit position.
5-10
E
Publicidad
Capítulos
