Publicidad
POWR
CRANKSHAFT
SERVICE POINTS
Crankshaft inspection
1. Measure:
Crank width A
G
Out of specification → Replace.
Crank width:
72.95–73.00 mm
(2.872–2.874 in)
2. Measure:
Deflection B
G
(with a dial gauge)
Out of specification → Replace.
Max. deflection:
0.05 mm (0.002 in)
3. Measure:
Big end side clearance C
G
(with a thickness gauge)
Out of specification → Replace.
Big end side clearance:
0.25–0.75 mm (0.010–0.030 in)
4. Measure:
Small end free play D
G
(with a dial gauge)
Out of specification → Replace.
Small end free play:
2.0 mm (0.08 in)
5-39
E
Publicidad
Capítulos
