Publicidad
OIL FILTER, WATER PUMP AND CRANKCASE COVER
a
1
(RIGHT)
Kick crank
1. Install:
• Kickstarter 1
• Plain washer
• Bolt (kickstarter)
NOTE:
Install the kickstarter so that the distance a
between the kickstarter and the plate (air cut-
off valve) is 8 mm (0.31 in) or more.
2. Install:
• Oil hose 1
• Bolt (oil hose) 2
3. Install:
• Copper washer 1
• Oil delivery pipe 2
• Union bolt (M8) 3
• Union bolt (M10) 4
Water pump housing
1. Install:
• Dowel pin 1
• O-ring 2
4 - 63
ENG
33 Nm (3.3 m · kg, 24 ft · lb)
8 Nm (0.8 m · kg, 5.8 ft · lb)
New
18 Nm (1.8 m · kg, 13 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
New
Publicidad
Capítulos
