Publicidad
FRONT BRAKE AND REAR BRAKE
5 - 21
2. Install:
• Brake lever 1
• Bolt (brake lever) 2
6 Nm (0.6 m · kg, 4.3 ft · lb)
• Nut (brake lever) 3
6 Nm (0.6 m · kg, 4.3 ft · lb)
NOTE:
Apply the lithium soap base grease on the
brake lever sliding surface, bolt and contacting
surface of the master cylinder piston.
Rear master cylinder
1. Install:
• Copper washer 1
• Brake hose 2
• Union bolt 3
30 Nm (3.0 m · kg, 22 ft · lb)
WARNING
Always use new copper washers.
CAUTION:
Install the brake hose so that its pipe por-
tion a directs as shown and lightly
touches the projection b on the master
cylinder.
2. Install:
• Master cylinder 1
• Bolt (master cylinder) 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
3. Install:
• Spring 1
• Brake pedal 2
• O-ring 3
New
• Bolt (brake pedal) 4
26 Nm (2.6 m · kg, 19 ft · lb)
• Clip 5
NOTE:
Apply the lithium soap base grease on the bolt,
O-ring and brake pedal bracket.
CHAS
New
Publicidad
Capítulos
