Siemens SINAMICS G130 Manual De Listas página 1118

<1> B_INF and S_INF not for S150 and G130.
<2> A_INF and S_INF not for G130/G150.
<3> The following representation applies for words: 4000 hex = 100 %.
The reference variables p200x apply for the ongoing interconnection (100 % -> p200x).
The following applies for temperature values: 100 °C -> 100 % = 4000 hex; 0 °C -> 0 %.
<4> Using the binector/connector converters at [2472], bits of 4 send words can be interconnected with any binectors.
<5> Only for CU_S and CU_G.
<6> Not for TB30, TM15DI_DO, TM31 and TM120.
<7> TM15DI_DO and TM120 not for G130/G150.
<8> Not for A_INF. B_INF, S_INF.
1 2
DO: A_INF, B_INF, CU_G, CU_S, S_INF,TB30, TM15DI_DO, TM31, TM120
PROFIdrive - IF2 send telegram, free interconnection
IF2 Diag send word
r8853[0 ... 4], [0 ... 7], [0 ... 10], [0 ... 25]
<4>
... <5>
...
p8851[0]
(0)
p8851[1]
(0)
p8851[2]
(0)
p8851[3]
(0)
p8851[4]
(0)
p8851[5]
(0)
<6>
p8851[6]
<6>
(0)
p8851[7]
<5>
<6> (0)
p8851[8]
<5> <6> (0)
p8851[9]
(0)
<5> <6>
p8851[10]
(0)
<8> <5> <6>
p8851[20]
(0)
<5> <6>
<3>
Reference quantities for further interconnection
p200x
3 4
<6> ...
...
PZD send word 1
PZD send word 2
PZD send word 3
PZD send word 4
PZD send word 5
PZD send word 6
<6>
PZD send word 7
<6>
<6> <5>
PZD send word 8
<6> <5>
PZD send word 9
PZD send word 10 <6> <5>
PZD send word 11 <6> <5> <8>
PZD send word 25 <6> <5>
5
fp_2493_54_eng.vsd
27.06.13 V04.07.00
PROFIdrive Sampling time
Send telegram
Header
Drive object 1
Drive object 2
.
.
.
Drive object n
.
.
.
Drive object m
Trailer
PROFIBUS
PROFINET
6 7
Function diagram
S120/S150/G130/G150
<1>
<2>
<7>
8
- 2493 -