Siemens SINAMICS G130 Manual De Listas página 1257

[8732] From sequence control
[8732] From sequence control
[8732] From sequence control
[8732] From sequence control
[8732] From sequence control
Bit 9 = 1 --> Ready to exchange process data
[8750] From power unit
[8734.4] From line contactor control
<1> The drive object is ready to accept data.
<2> Only for S120 and G150.
1 2
DO: B_INF
Basic Infeed - Status word, sequence control infeed
Bit
Status word sequence control infeed
No.
0 1 = Ready for switching on
1 1 = Ready for operation
2 1 = Operation enabled
3 Reserved
4 1 = No OFF2 active
5 Reserved
6 1 = Switching on inhibited
7 Reserved
8 Reserved
9 1 = Control requested
<1>
10 Reserved
11 1 = Pre-charging completed
12 1 = Line contactor closed
13 Reserved
14 Reserved
15 Reserved
3 4 5 6
Function diagram
fp_8726_54_eng.vsd
S120/S150/G130/G150
21.10.10 V04.07.00
p0115[3] (2000.00 μs)
<2>
ZSW sequence ctrl
r0899
r0899.0
r0899.1
r0899.2
r0899.4
r0899.6
r0899.9
r0899.11 [8760.5]
r0899.12
7 8
- 8726 -