Checking The Steering; Checking; The Engine Fulcrum Axis - APRILIA SR 50 Uso Y Mantenimiento

CHECKING THE STEERING

Carefully read p. 39 (MAINTENANCE).
Occasionally check the steering slack.
To check the steering it is necessary to:
Position the vehicle on the centre stand,
see p. 38 (POSITIONING THE VEHICLE
ON THE STAND).
NOTE
Prepare a 270 mm high support, the
base of which must measure 200 x 200 mm.
Place the support under the vehicle and
a spongy cloth between them, so that the
front wheel can move freely and the vehi-
cle cannot fall down.
WARNING
Make sure that the vehicle is stable.
Shake the fork in the direction of travel.
NOTE
Do not shake the fork excesively,
otherwise you may take in consideration the
movement of the stand, thus observing an
incorrect slack.
Repeat the previous operation more than
once.
If you find that there is a considerable
slack, contact your aprilia Official Dealer
to restore the optimal steering conditions.

CHECKING

THE ENGINE FULCRUM AXIS

Carefully read p. 39 (MAINTENANCE).
Periodically check the slack existing between
the engine pin bushings.
To carry out this operation, proceed as fol-
lows:
Position the vehicle on the centre stand.
Shake the wheel transversally with re-
spect to the riding direction.
If you find that there is a considerable
slack, contact your aprilia Official Dealer,
to restore the optimal operating conditions.
use and maintenance SR 50
49