Removing The Front Inner Shield - APRILIA SR 50 Uso Y Mantenimiento

REMOVING
THE FRONT INNER SHIELD
Carefully read p. 39 (MAINTENANCE).
NOTE
Remove the key from the ignition
switch.
Position the vehicle on the centre stand,
see p. 38 (POSITIONING THE VEHICLE
ON THE STAND).
Unscrew and remove the two screws
(1).
Remove the footrest mat (2).
Unscrew and remove the two fastening
screws (3) of the bag hook.
Remove the bag hook (4).
Unscrew and remove the screw (5) with
the relevant washer.
Unscrew and remove the three screws
(6).
Unscrew and remove the screw (7).
CAUTION
Proceed with care.
Do not damage the tangs and/or their
seats.
Handle the painted components with care
and avoid scraping or damaging them.
Withdraw and remove the front inner
shield, rotating it toward the saddle.
use and maintenance SR 50
54
4
3
6
5
6
3
6
2
7
1
1