Changing The Dashboard Bulbs - APRILIA SR 50 Uso Y Mantenimiento

NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
Correctly install a new bulb of the same
type.
NOTE
If the bulb socket (9) goes out of its
seat, insert it correctly, making the bulb
socket opening coincide with the screw seat.
CHANGING
THE DASHBOARD BULBS
Carefully read p. 65 (BULBS).
NOTE
Before changing a bulb, check the
fuses, see p. 64 (CHANGING THE FUSES).
The dashboard contains:
– the warning light bulbs;
– the dashboard lighting bulbs.
To change the bulbs:
Carefully read p. 65 (BULBS).
use and maintenance SR 50
68
WARNING LIGHT BULBS
NOTE
Extract the bulb sockets one by one,
in such a way as to avoid positioning them
incorrectly during the reassembly.
Extract the relative bulb socket:
Pos. Warning light
Direction
10
indicators ( )
2 stroke
11
oil reserve ( )
Low
12
beam ( )
High beam ( )
12
Low
13
fuel ( )
14
Injection check
Extract the bulb and replace it with one of
the same type.
16
14
10 11
DASHBOARD LIGHTING BULBS
NOTE
Extract the bulb sockets one by one,
in such a way as to avoid positioning them
incorrectly during the reassembly.
Extract the bulb socket of the dashboard
part in which there has been a light de-
Colour
crease:
green
Pos. Lit part
red
15 Upper right part
green
16 Upper left part
blue
17 Lower right part
amber
Extract the bulb and replace it with one of
red
the same type.
17
12 13 15