Assembling Exhaust Cover Parts - TOHATSU EverRu MX 18E2 Manual De Servicio

Power Unit
&
%
$
5-70
LIT
LIT LIT
'
!
"
#
6. Put magneto basement to crank shaft.
LIT
LIT

27) Assembling Exhaust Cover Parts

1. Assemble exhaust cover (inner), exhaust cover (outer)
and gaskets.
2. Attach exhaust cover securing bolts
them in the order of their numbers shown to specified
torque in two steps.
Temporary Tightening :
Final Tightening :
Tighten the bolts in the order of the numbers
marked on the exhaust cover.
to and tighten
1 11
6 N · m (4 lb · ft) [0.6 kgf · m]
8.8 N · m (7 lb · ft) [0.9 kgf · m]
2st X18E2 2012
GB